Moving the telescope

	The trailer. Dimensions are 7' x 4' x 4.5'.
	View of the “D” rings that hold the telescope. You can also see the blocks that are used to lift the telescope while an innertube is installed under it.
	Same view but with the innertube shown.
	The telescope ready to be installed in the trailer.
	The telescope installed in the trailer.
	View of the suspension. (The innertube air pressure was low when this photo was taken. The normal height is two times what is shown here.)
	Secondary cage box installed in the trailer.
	Interior lights control panel. You can also see below the 120vac entry. The 120vac is used for the dew heaters.
	The 120vac is distributed to the secondary cage box and to the primary mirror box.